What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 26.06.2025 07:44
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Here is a simplified AC power diagram.
But it can get overloaded, and no longer works.
At least they know the answer if they wanted it.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
For this case there are devices called Metal oxide varistors (MOV).
Upvotes:
(Dc diagram shown, AC is similar).
He then describes the function of a fuse.
The third is lightning and “how it gets conducted into a home.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Barnstars:
Reds Sign Wade Miley, Place Hunter Greene On Injured List - MLB Trade Rumors
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
so, what happens?
These devices are installed between the “hot” and “neutral” and protective ground.
Discovery of 100-million-year-old dinosaur eggs reveals life in Jurassic America - Earth.com
One is “what exactly is in a ‘surge protector’ ? ”
[image of Common-mode choke]
What does a fuse do?
At one ohm, the resistor has a maximum of 1 watt power.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
what exactly is a ‘surge’ protector?
I post the exact comment here.
Because the load is inductive, the current lags the voltage.(by a bit).
but I think this circuit , shows a few more pieces.
How often do you watch the news on TV?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
A circuit breaker is similar, but is resettable.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
eight
Edit 2024–10.
What are you wearing under your clothes today?
This is where the MOV conducts again, and dissipated the energy.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What do people with very high IQs do all day?
So, the voltage could go up to 500 volts, and the fuse will not open up.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–14 [Omar Gharbi Omar Gharbi ]
It also is a device that limits the change in current flow.
This device then solves the entire problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
but this device (an Inductor) … impedes the rapid changes in the current.
There are two important concepts here.
What is lightning?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This one hit behind the barn.
In schematic diagrams this is the symbol for a fuse:
It seems Mohan does not understand the difference between a comment and an Answer.
These are simplified answers to the original question, and does not change anything I wrote above.
He then asserts :
But… the neutral is now “floating” because of the 1 ohm resistance.
One
the problem then depends on "how fast does the fuse operate?".
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
nine
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–10[John johnson John Johnson ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes Rainy Season and Lightning.
Now when you have a certain ac resistance, then a current flows in a loop.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There are three different concepts here that are getting confused.
An AC voltage/ current source, and an ac inductive load.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
The other is “what does a “fuse” do?”
a photo is worth a thousand words.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The MOV will conduct when the voltage exceeds 50% of line voltage.
First Sentence:
A fuse is a non-resetable over current circuit protector.
The bolt then partially travels down the line to your home.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is 'the assistant's answer'